PANASONIC HD Integrated Camera White
Product code : PAN.AW-HE130WEJ
UPC code :5025232801022
Introducing a new PTZ camera capable Production Quality Full HD video output up to 1080/60p via IP transmission, in addition to 3G-SDI and HDMI. Equipped with three newly developed 1/2.86 MOS sensors for high sensitivity, a superior S/N ratio and high resolution. The AW-HE130W/K also supports PoE+*, so the camera only needs one LAN cable for its power supply, control and video output. Presenting the new standard in versatile, high-quality remote production with 3G-SDI, IP-Streaming, and POE+.
- Newly developed 1/2.86-type three MOS sensors
- 1.4x Extender Zoom
- Optical Image Stabilizer, Night Mode & Fan-Less Design
- PoE+ for Power, Streaming & Control via a Single Cable
- HD-IP Streaming
|Dimensions (W x H x D)||180 mm x 228 mm x 234 mm
(7-3/32 inches x 9 inches x 9-3/16 inches)
(excluding protrusions, cable cover, direct ceiling mount bracket)
|Storage Temperature||–20 °C to 50 °C (–4 °F to 122 °F)|
|Power Requirements||DC 12 V (AC adaptor supplied) DC 42 - 57 V (PoE+ power supply)
1.8 A (AC adaptor supplied) 0.6 A (PoE+ power supply)
|Ambient Operating Temperature||0 °C to 40 °C (32 °F to 104 °F)|
|Finish||AW-HE130WP/AW-HE130WE: Pearl white
AW-HE130KP/AW-HE130KE: Metallic black
|Allowable Humidity Ranges||20 % to 90 % (no condensation)|
|Mass||Approx. 3.1 kg (6.83 lb) [Including mount bracket]|
|Controller supported*1||AW-RP120G, AW-RP50, AK-HRP200G|
|LENS||Motorized 20 zoom, F1.6 to F3.4
(f=4.5 mm to 90 mm; 35 mm equivalent: 32.13 mm to 642.5 mm)
|MINIMUM ILLUMINATION||2 lx (50 IRE, F1.6, 36 dB)|
|Synchro scan||59.94?Hz: 60.15 Hz to 642.21 Hz
50?Hz: 50.15 Hz to 535.71 Hz
|Horizontal Resolution||1000 TV lines Typ (Center area)|
|Gain Selection||Auto, 0 dB to 36 dB|
|WHITE BALANCE||AWB A, AWB B, ATW, 3200K, 5600K, VAR (2000K to 15000K)|
|Color separation optical system||3MOS|
|Focus||Switching between auto and manual|
|Focus Distance||Entire zooming range: 800 mm (2.62 ft)
Wide end: 400 mm (1.31 ft)
|Gamma||HD, SD, FILMLIKE1, FILMLIKE2, FILMLIKE3
0.30 to 0.75 (Manual setting)
|Scene File||Scene1, Scene2, Scene3, Scene4|
|Electronic Shutter Speed||59.94p/59.94i: 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
29.97p: 1/30, 1/60, 1/120, 1/250, 1/500,1/1000, 1/2000, 1/4000, 1/10000
23.98p: 1/24, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
50p/50i: 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
25p: 1/25, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
|Imaging Sensors||1/2.86-type Full-HD 3MOS|
|Chroma Amount Variability||OFF, -99 % to 40 %|
|Frame Mix*2||0 dB, 6 dB, 12 dB, 18 dB, 24 dB|
|STANDARD ACCESSORIES||Mount bracket for installation surface (Hanging*6 / Desktop): 1, Drop-prevention wire: 1, Drop-prevention wire mounting screw (comes attached to the unit): 1, Bracket mounting screws (bind-head) M4 x 10 mm: 4, Main unit mounting screw (with flat washer,spring washer) M3 x 6 mm: 1, Cable cover: 1, Power cable: 1, AC adaptor: 1, CD-ROM|
|Input Connector||DC 12 V IN, G/L IN (BNC)
• BBS (Black Burst Sync), tri-level sync supported
• Locking to a color subcarrier is not possible with BBS.
PoE+ (IEEE802.3at standard)
|Quietness||NC35 or less|
|Note||*1: It may be necessary to upgrade the version of the controller in order to support the unit. For details on upgrading, visit the support page on the following website. http://pro-av.panasonic.net/
*2: This cannot be configured when the format is 1080/29.97p, 1080/23.98p, 1080/29.97PsF 1080/23.98PsF, 1080/25p, or 1080/25PsF.
*3: To ensure safety, the unit must be secured using the mount bracket supplied.
*4: Use of an STP (shielded twisted pair) cable is recommended.
*5: Depending on the pan or tilt position, the camera may be reflected in the image.
*6: To ensure more safety, AW-HE130W/K can be secured by using the direct ceiling mount bracket (WV-Q105A).
|Installation Method||Stand-alone (Desktop) or suspended (Hanging)*3|
|Pan-tilt Head Unit||-|
|Camera/pan-tilt head control||IP connecting cable
• When connecting through a PoE+ hub:
LAN cable*4 (category 5e or above, straight cable), max. 100 m (328 ft)
• When a PoE+ hub is not used:
LAN cable*4 (category 5 or above, crossover cable) max.100 m (328 ft)
RP connecting Cable
LAN cable*4 (category 5 or above, straight cable), max. 1000 m (3280 ft)
RS-422A, AW series protocol
|VIDEO OUTPUT||HDMI: HDMI connector
• HDCP is not supported.
• Viera Link is not supported.
HD/SD-SDI OUT: SMPTE424/SMPTE292/SMPTE259 standards 75 Ω (BNC x 1)
VIDEO OUT: NTSC/PAL 1.0 V [p-p]/75 Ω (BNC x 1)
|Input/Output Connector||LAN: LAN connector for IP control (RJ-45), PoE+
RS-422: CONTROL IN RS-422A (RJ-45)
MIC/LINE input: ø3.5 mm stereo mini jack Input impedance: High impedance
• During MIC input Supported mic: Stereo mic
(plug-in power, on/off switching via menu)
• Supply voltage: 2.5 V ± 0.5 V
Mic input sensitivity: Approx. -40 dBV ± 3 dBV (0 dB=1 V/Pa, 1 kHz)
• During LINE input
Input level: Approx. -10 dBV ±3 dBV
|Pan-tilt Operation Speed||0.08°/s to 60°/s|
|Tilting Range*7||–30° to 210°*5|
If you wish to purchase in store, to avoid disappointment, please confirm the availability of the product at your local John Barry prior to visiting.
Alternatively, orders placed online by 2pm AEST are typically dispatched same day, if ordered online.
If your product is on backorder, please contact us for an ETA.
Shipping is done via Startrack Express or Australia Post eParcel service and tracking advice will be provided once shipped.
For more information, please visit our Shipping Policy.
Should you have any questions regarding our equipment warranty conditions, please contact us
John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.