Sound Devices 2-Channel Digital Wireless Transmitter with SpectraBand Technology
Press and move to zoom
Mouse over image to zoom

Sound Devices 2-Channel Digital Wireless Transmitter with SpectraBand Technology

Product code : SOU.A20-TX



$ 4,565.00
    • Availability: In Stock Order before 2pm - Dispatch same day

Tell a Friend

Sound Devices A20-TX Digital Wireless Transmitter 

 

A Kaleidoscope of Connectivity 
Finding a tool that can serve multiple purposes is the goal of every audio professional. More flexible gear means less – less for you to carry in a bag or fit in a case, and less gear to rent for a gig. That’s the philosophy behind the A20-TX digital wireless transmitter. Sound Devices engineered it to be compatible with more input sources than any other transmitter, including two- or three-wire lavs, dynamic mics, phantom-powered condenser mics, guitars, balanced line-level sources, and even AES digital mics. The A20-TX transmitter’s multipurpose input saves you from having to pack or rent more transmitters.

 
True Balanced Input  
The Sound Devices A20-TX transmitter includes an industry first: a full, true balanced ultra-low-noise, high-headroom mic preamp. In fact, this is the same preamp built into Sound Devices’ vaunted 8-Series mixers. The A20-TX mic preamp is a big step up from the excellent mic preamp built into the original A10-TX transmitter in terms of noise, headroom, and sonic purity. 

 
Excellent Battery Life 
The A20-TX transmitter features battery life of up to 12 hours. Additionally, the A20-TX’s flexible powering scheme allows the use of many battery types, including standard alkaline or NiMh AA batteries, rechargeable Li-Ion batteries, rechargeable LiFePO4 batteries, or even USB battery packs.

 
Advanced Features 
The A20-TX transmitter boasts industry-leading features like Sound Devices’ proprietary NexLink 2.4 GHz long-range wireless remote control technology that allows multiple A20-TX transmitters to be controlled and timecode synced dependably from an A20-Nexus or A20-Nexus Go digital receiver. NexLink works over long distances – even through Wi-Fi, Bluetooth, and other 2.4 GHz interference. The A20-TX transmitter’s long-range modulation achieves excellent operational range. The A20-TX also includes Sound Devices’ proprietary SpectraBand technology, which enables the A20-TX transmitter to tune over a super wide range of 169-1525 MHz.

 
A20-TX Switch? 
For the applications that call for a user-actuated switch, the A20-TX transmitter features the industry’s first physically removable switch. Its large size, positive tactile operation, and magnetic activation give users ultimate confidence and reliability.  

 
GainForward 
With GainForward, there is no gain setting on the transmitter! You control your A20-TX transmitter’s audio gain, either directly at the mixer’s digital trim control or at the wireless receiver, while maintaining the best audio performance in the industry. If the source is too soft or too loud, just use a downstream mixer’s digital trim gain control to make adjustments. No more bothering the talent to make gain changes. 

 
Powering Options 
There’s no need to stock special batteries for the A20-TX transmitter. It can work with any type of AA batteries, no matter the chemistry.

 
e-Paper Display 
You can easily view settings and menus with the A20-TX transmitter’s e-Paper Display, even in sunlight or when powered down and its batteries removed. Need to change a setting in the dark? Open the battery door and the screen’s backlight turns on for easy visibility. 

 

 

Worldwide VHF and UHF tuning range from 169 MHz-1525 MHz. 
Up to 12 hours battery runtime. 
Eco-friendly operation from rechargeable Lithium batteries or from standard AA batteries. 
Built-in battery charger via USB-C. 
Full remote control of the A20-TX via A20-Remote companion app and from A20-Nexus and A20-Nexus Go via long-range NexLink. 
State-of-the-art 100% digital long-range modulation delivers the longest transmission distance of any system on the market.? 
RF Power output from 2 mW to 40 mW. 
Lemo input supports 2-wire or 3-wire mono lav, balanced mic, switchable 12, 48V phantom, balanced line-level, AES3, AES42 (compatible with Schoeps SuperCMIT), and guitar (w/ optional Smart Guitar Cable).? 
GainForward Architecture – no gain control to worry about on the A20-TX. 
Full 10 Hz - 20 kHz audio bandwidth. 
Sound Devices 8-Series, fully balanced mic preamp built in (140 dB dynamic range). 
Ultra-quiet lavalier mic preamp (134 dB dynamic range). 
Built-in 32-bit float, 48 kHz recorder with removable micro-SD card.? 
Ultra-stable timecode built in, auto jammed via wireless NexLink. 
Sunlight-readable e-Paper screen for control and display. Display persists when powered off. 
USB-C for pairing with the A20-Nexus, file offload, charging, and timecode jamming.? 
A20-TX Switch: Optional user-programmable bayonet switch, magnetically sensed and physically removable
Specifications are subject to change without prior notice. For the latest information available on all Sound Devices products, visit: www.sounddevices.com

Frequency Range
169 to 1525 MHz
Transmitter tunable in 25 kHz steps
Available frequencies are dependent on region

RF Output Power
Off, Low - 2 mW, Normal - 10 mW, High - 20 mW, Extra High -40 mW

Modulation Mode
Proprietary, 100% digital RF modulation
Standard or Long Range, selectable

Antennas
UHF RF: SMA connector, removable antenna
2.4 GHz built-in, bottom of unit

Audio Frequency Response
10 Hz - 20 kHz, +/- 1 dB re 1 kHz

Audio Input
Lavalier Microphone
o2-wire or 3-wire type lavalier mics supported
oAuto-selected when lavalier mic connected to Lemo input
oDynamic range: 134 dB min, A-weighted
oInput clip level: 5V p-p (limited by lavalier microphone)
oLemo pin 1 = ground; Lemo pin 2 = 5V bias power; Lemo pin 3 = audio/bias (8k to 5V internal)
oAuto unit power on/off with connection/removal of lavalier microphone (menu selectable)
Balanced Mic
oTrue, fully balanced, Sound Devices 8-Series mic preamp
oDynamic range: 140 dB min, A-weighted
oMenu selectable with connection of XL-BALXLR-4 cable to Lemo input
oPhantom power: 12V or 48V, full 10mA available per IEC 61938
oXLR pin 1 = ground; XLR pin 2 = +; XLR pin 3 = -
Line Input
oTrue, fully balanced line-level input (no external resistors required)
oInput clip level: +26 dBu
oMenu selectable with connection of XL-BALXLR-4 cable to Lemo input
oXLR pin 1 = ground; XLR pin 2 = +; XLR pin 3 = -
AES42
oAES digital input with common mode power for Digital mics such as Schoeps SuperCMIT
o250mA current available
oSelectable audio channel 1 or 2 via menu
oMenu selectable with connection of XL-BALXLR-4 cable to Lemo input
oXLR pin 1 = ground; XLR pin 2 = +; XLR pin 3 = -
AES3
oAES digital input without common mode power
oSelectable audio channel 1 or 2 via menu
oMenu selectable with connection of XL-BALXLR-4 cable to Lemo input
oXLR pin 1 = ground; XLR pin 2 = +; XLR pin 3 = -
Guitar
oAuto-selected when connected with A20-TX Smart Guitar Cable
o¼” tip = + ¼” sleeve = ground
o18V p-p max input level
oInput impedance: 100k, 1M, 10M (menu selectable)
oCable capacitance: 0 pF - 3000 pF in 50 pF steps (menu selectable)
oBalanced connection from ¼” plug to Lemo for low-noise susceptibility

Menu and Controls
e-Paper screen highly visible in direct sunlight
e-Paper screen keeps display even with no batteries
Power/Pair button and three navigation buttons protected inside battery compartment
Optional user-programmable bayonet switch for top of transmitter (A20-TX Switch)

Remote Control
A20-Remote Android, iOS, and iPad app via Bluetooth 5.2 LE
A20-Nexus, A20-Nexus Go receivers via super-long-range NexLink

Recording Media
Micro SD card

Recording File Format
32 Bit Float, 48 kHz, Monophonic
Broadcast WAV (<4 GB), RF64 WAV (>4 GB)

Simultaneous Record and Transmit mode when using lavalier mic input is not available on A20-TX units sold or operated in the United States of America.

Timecode
Input via XL-TC-USBC-LEMO, XL-TC-USBC-BNC, USB-A to USB-C (from 8-Series) or wirelessly over NexLink (from A20-Nexus/A20-Nexus Go)
LTC: 0.3 V - 3 V p-p (–17 dBu to +3 dBu), 20k ohm impedance
LTC Output via XL-TC-USBC-LEMO: 3 V p-p, 400 ohm impedance

Timecode Clock
0.2 ppm accuracy
Holds accurate clock for four hours while powered down with batteries inserted, holds for one hour without batteries via internal supercapacitor
Auto Jams timecode via USB-C connector or wirelessly via NexLink.

Timecode Frame Rates
23.98, 24, 25, 29.97 DF, 29.97 ND, 30 DF, 30 ND
Frame rates are auto-detected from incoming source

USB-C
Mass Storage (USB-C): USB 2.0 high speed for file transfer
Charges Li-ion and LiFePO4 batteries inserted in A20-TX
Pairing to Sound Devices A20-Nexus, A20-Nexus Go receivers
Timecode I/O

Powering
“1.5V” Alkaline, Lithium primary, NiMH AA batteries; 3 for operation
“3.7V” Rechargeable Lithium-Ion, Rechargeable LiFePO4 AA batteries; 1, 2, of 3 for operation
Energizer Ultimate AA primary cells recommended for longest runtime

Battery Charging
Built-in charging of Lithium-Ion and LiFePO4 batteries via USB-C

Battery Runtime
Up to 12 hours (depending on battery chemistry, number of batteries, RF power, input type, mode)
Unit can be completely powered off remotely via app or via NexLink to extend battery runtime 

Environmental
Operating: -10° C to 38° C
Storage: -40° C to 85° C
0 to 90% relative humidity (non-condensing)

Dimensions (H x W x D)
3.3 x 2.5 x 0.71 in 
8.5 x  6.4 x 1.81 cm

Weight
0.2lbs (without batteries)
98g (without batteries) 
Accessories visible on product image are not included
Please be aware that John Barry has multiple warehouse locations in different states. 

If you wish to purchase in store, to avoid disappointment, please confirm the availability of the product at your local John Barry prior to visiting.

Alternatively, orders placed online by 2pm AEST are typically dispatched same day, if ordered online.

If your product is on backorder, please contact us for an ETA.

Shipping is done via Startrack Express or Australia Post eParcel service and tracking advice will be provided once shipped.

For more information, please visit our Shipping Policy.
John Barry Sales offers the same the warranty conditions as scheduled by the product manufacturer.

Should you have any questions regarding our equipment warranty conditions, please contact us

John Barry will happily exchange a product sold to you that does not match the description on our website, or if the product is not of an acceptable quality or condition for use.

John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.

You May Also Be Interested In

Sound Devices Antenna
  • $ 50.00
  • Qty
Sound Devices A20 Battery Doubler
  • $ 264.00
  • Qty
Sound Devices A20-Shelf Nexus 1u Mounting shelf
  • $ 400.00
  • Qty