Shape VN15D 15 mm Studio Sliding Baseplate For Sony Venice
Press and move to zoom
Mouse over image to zoom

Shape VN15D 15 mm Studio Sliding Baseplate For Sony Venice

Product code : SHA.VN15D


Bookmark and Share


$ 1,470.00
    • Availability: Out of Stock Call for a delivery estimate

Tell a Friend

SHAPE Bridge plate 15 mm studio Arri standard (DP15S)

The studio bridgeplate can easily slide onto the lightweight ARRI standard 12" dovetail plate (DP12A) for additional leverage and mounting options. It is made of CNC aluminum and it is also designed with locking levers to secure the bridgeplate to the dovetail. The ARRI Standard Studio Bridgeplate comes with two tapered, 12" 15 mm rods to easily mount and dismount your camera and accessories. The studio-offset rods are spaced 100 mm apart. One 1/4"-20 and one 3/8"-16 screw allow mounting a variety of cameras, and the plate locks and slides up and down the rods with the use of a locking lever.  A flat screwdriver is provided to tighten the mounting screws, and it can be attached to the bridgeplate with a magnet.

15 mm 12" rods (15TUBE12)

This pair of SHAPE 15 mm Aluminum Rods (12") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.
The rods are each 15 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

15 mm 12" rods (15TUBE12)

This pair of SHAPE 15 mm Aluminum Rods (12") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.
The rods are each 15 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

Sliding riser and locking lever

The Riser allows to adjust the position of your camera while mounted on the Bridge Plate with respect to the 19 mm Studio Optical Center of the Sony Venice Camera. An easy-to-access locking lever, located on the side of the Riser, enables you to secure the Camera Plate firmly in place. There is also a quick release safety pin that prevents the Camera Plate from sliding off the Riser which is fully engaged when the latch makes an audible “click” sound. Several 1/4"-20 and 3/8"-16 threaded holes are also available for attaching the Riser onto the Bridge Plate. It is also designed to set the Sony Venice camera at proper height with respect to the camera Optical Center

  • (1) ARRI STANDARD 12? SLIDING DOVETAIL
  • (1) 15MM STUDIO ARRI STANDARD BRIDGE PLATE
  • (1) SLIDING RISER AND LOCKING LEVER
  • (1) SLIDING CAMERA PLATE
  • (1) PAIR OF 15MM RODS (12”)
If promotional pricing has been applied be advised it only applies to current stock & until stock lasts.
  • ARRI-Standard Dovetail Bridgeplate
  • Correct Optical Axis for VENICE
  • Sliding Camera Plate
  • Compatible with 15 mm Studio Accessories
  • Pair of 15 mm 12? rods with 100 mm spacing
  • 12” Dovetail
Weight:
3.79 lbs
1.72 kg
Dimensions:
3.41 x
5.35 x
11.81 in
8.66 x
13.59 x
30.00 cm
UPC:
629266008232
Accessories visible on product image are not included
Please be aware that John Barry has multiple warehouse locations in different states. 

If you wish to purchase in store, to avoid disappointment, please confirm the availability of the product at your local John Barry prior to visiting.

Alternatively, orders placed online by 2pm AEST are typically dispatched same day, if ordered online.

If your product is on backorder, please contact us for an ETA.

Shipping is done via Startrack Express or Australia Post eParcel service and tracking advice will be provided once shipped.

For more information, please visit our Shipping Policy.
John Barry Sales offers the same the warranty conditions as scheduled by the product manufacturer.

Should you have any questions regarding our equipment warranty conditions, please contact us

John Barry will happily exchange a product sold to you that does not match the description on our website, or if the product is not of an acceptable quality or condition for use.

John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.