- 1800 717 710 | Newsletter |
- FAQ |
- Contact
-
0 product
My Cart - Quick Order
- Home>
- Brands>
- Sanken Microphones>
- Audio>
- Microphones>
- Studio>
- Studio microphones>
- Sanken CU-41 Cardioid Condenser Microphone
Sanken CU-41 Cardioid Condenser Microphone
The Sanken CU-41 is the microphone that that captures a perfect sonic panorama in either near-field or far-field imagery, with a completely natural, uncolored sound.
The special two-way transducer provides a totally flat frequencyresponse and its distortion-free performance is renowned worldwide.
Faithfully pick up everything from the pulsating lows of the deepest bass instruments to the piercing highs of a coloratura soprano
Tracking a band and need a versatile microphone that can handle drums, electric or acoustic guitar, a horn section, or big vocal sound?
The CU-41 captures it all, with a transparent, very detailed and truly high-fidelity sound. On a grand piano, this mic gives clarity and low-end quality like no other. A rich, male baritone resonates through the speakers with unbelievable warmth.
Unlike conventional microphones, the CU-41 houses two condenser titanium capsules vertically mounted and transformer coupled. Sanken’s original circuitry combines the outputs from the two diaphragms to provide a totally pure sound without phase distortion.
The CU-41 microphone has a solid cardioid pattern with low proximity effect.
Featuring titanium capsules are impervious to humidity and temperature, providing a very stable and consistent sound. It’s not easy to produce capsules using titanium, again Sanken provides a unique solution.
Suitable for a wide variety of applications in recording, broadcasting, television and motion picture studios, the CU-41 delivers flat response from 20Hz to 20KHz. It can faithfully pick up everything from the pulsating lows of the deepest bass instruments to the piercing highs of a coloratura soprano; from the gentlest whisper to the most deafening percussive sound – without clipping. Response is uniform over the full audible frequency range.
In the 80s this mic was very popular for vocals, then it also gained popularity as a spotlight mic for orchestral and then jazz.
Applications
- Acoustic Guitar
- Background or Chorus Vocals
- Brass and Woodwind
- Drums Close Mic
- Electric/Bass Guitar Amps
- Orchestra Solo
- Piano
- Upright Bass
- Vocals
Vinyl Case
- Classic 80’s mic with crystal clear sound
- Dual titanium diaphragms immune to humidity and temperature fluctuation
- Smooth cardioid polar pattern
- Transparent and distortion-free
- Totally flat frequency response
Model Name | CU-41 |
Transducer | DC biased condenser |
Directivity | Cardioid |
Frequency response | 20Hz – 30kHz |
Sensitivity | 7mV/Pa(-43dB, 0dB=1V/Pa) |
Equivalent noise level (IEC) | 15dB A |
Max SPL(1% THD) | 140dB SPL |
Output impedance( 1kHz ) | 180 ohms |
Powering | +48V±4V phantom |
Current consumption | 1.5mA x 2 |
Weight | 600g / 1.32lbs |
Dimensions | 180mm x 50mm (D) |
Surface finish | Satin nickel |
Connector | XLR-3-12C(M) equivalent |
Model Name | CU-41 |
Transducer | DC biased condenser |
Directivity | Cardioid |
Frequency response | 20Hz – 30kHz |
Sensitivity | 7mV/Pa(-43dB, 0dB=1V/Pa) |
Equivalent noise level (IEC) | 15dB A |
Max SPL(1% THD) | 140dB SPL |
Output impedance( 1kHz ) | 180 ohms |
Powering | +48V±4V phantom |
Current consumption | 1.5mA x 2 |
Weight | 600g / 1.32lbs |
Dimensions | 180mm x 50mm (D) |
Surface finish | Satin nickel |
Connector | XLR-3-12C(M) equivalent |
Model Name | CU-41 |
Transducer | DC biased condenser |
Directivity | Cardioid |
Frequency response | 20Hz – 30kHz |
Sensitivity | 7mV/Pa(-43dB, 0dB=1V/Pa) |
Equivalent noise level (IEC) | 15dB A |
Max SPL(1% THD) | 140dB SPL |
Output impedance( 1kHz ) | 180 ohms |
Powering | +48V±4V phantom |
Current consumption | 1.5mA x 2 |
Weight | 600g / 1.32lbs |
Dimensions | 180mm x 50mm (D) |
Surface finish | Satin nickel |
Connector | XLR-3-12C(M) equivalent |
Model Name | CU-41 |
Transducer | DC biased condenser |
Directivity | Cardioid |
Frequency response | 20Hz – 30kHz |
Sensitivity | 7mV/Pa(-43dB, 0dB=1V/Pa) |
Equivalent noise level (IEC) | 15dB A |
Max SPL(1% THD) | 140dB SPL |
Output impedance( 1kHz ) | 180 ohms |
Powering | +48V±4V phantom |
Current consumption | 1.5mA x 2 |
Weight | 600g / 1.32lbs |
Dimensions | 180mm x 50mm (D) |
Surface finish | Satin nickel |
Connector | XLR-3-12C(M) equivalent |
If you wish to purchase in store, to avoid disappointment, please confirm the availability of the product at your local John Barry prior to visiting.
Alternatively, orders placed online by 2pm AEST are typically dispatched same day, if ordered online.
If your product is on backorder, please contact us for an ETA.
Shipping is done via Startrack Express or Australia Post eParcel service and tracking advice will be provided once shipped.
For more information, please visit our Shipping Policy.
Should you have any questions regarding our equipment warranty conditions, please contact us
John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.