PANASONIC HD Integrated Camera White

Dimensions (W x H x D)	180 mm x 228 mm x 234 mm (7-3/32 inches x 9 inches x 9-3/16 inches) (excluding protrusions, cable cover, direct ceiling mount bracket)
General	-
Storage Temperature	–20 °C to 50 °C (–4 °F to 122 °F)
Power Requirements	DC 12 V (AC adaptor supplied) DC 42 - 57 V (PoE+ power supply) 1.8 A (AC adaptor supplied) 0.6 A (PoE+ power supply)
Ambient Operating Temperature	0 °C to 40 °C (32 °F to 104 °F)
Finish	AW-HE130WP/AW-HE130WE: Pearl white AW-HE130KP/AW-HE130KE: Metallic black
Allowable Humidity Ranges	20 % to 90 % (no condensation)
Mass	Approx. 3.1 kg (6.83 lb) [Including mount bracket]
Controller supported*1	AW-RP120G, AW-RP50, AK-HRP200G
LENS	Motorized 20 zoom, F1.6 to F3.4 (f=4.5 mm to 90 mm; 35 mm equivalent: 32.13 mm to 642.5 mm)
MINIMUM ILLUMINATION	2 lx (50 IRE, F1.6, 36 dB)
Synchro scan	59.94?Hz: 60.15 Hz to 642.21 Hz 50?Hz: 50.15 Hz to 535.71 Hz
Horizontal Resolution	1000 TV lines Typ (Center area)
Gain Selection	Auto, 0 dB to 36 dB
WHITE BALANCE	AWB A, AWB B, ATW, 3200K, 5600K, VAR (2000K to 15000K)
Color separation optical system	3MOS
Focus	Switching between auto and manual
Focus Distance	Entire zooming range: 800 mm (2.62 ft) Wide end: 400 mm (1.31 ft)
Gamma	HD, SD, FILMLIKE1, FILMLIKE2, FILMLIKE3 0.30 to 0.75 (Manual setting)
Scene File	Scene1, Scene2, Scene3, Scene4
Electronic Shutter Speed	59.94p/59.94i: 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 29.97p: 1/30, 1/60, 1/120, 1/250, 1/500,1/1000, 1/2000, 1/4000, 1/10000 23.98p: 1/24, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 50p/50i: 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 25p: 1/25, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
Imaging Sensors	1/2.86-type Full-HD 3MOS
Chroma Amount Variability	OFF, -99 % to 40 %
Camera Unit	-
Frame Mix*2	0 dB, 6 dB, 12 dB, 18 dB, 24 dB
STANDARD ACCESSORIES	Mount bracket for installation surface (Hanging*6 / Desktop): 1, Drop-prevention wire: 1, Drop-prevention wire mounting screw (comes attached to the unit): 1, Bracket mounting screws (bind-head) M4 x 10 mm: 4, Main unit mounting screw (with flat washer,spring washer) M3 x 6 mm: 1, Cable cover: 1, Power cable: 1, AC adaptor: 1, CD-ROM
Input Connector	DC 12 V IN, G/L IN (BNC) • BBS (Black Burst Sync), tri-level sync supported • Locking to a color subcarrier is not possible with BBS. PoE+ (IEEE802.3at standard)
Panning range	±175°
Quietness	NC35 or less
Note	*1: It may be necessary to upgrade the version of the controller in order to support the unit. For details on upgrading, visit the support page on the following website. http://pro-av.panasonic.net/ *2: This cannot be configured when the format is 1080/29.97p, 1080/23.98p, 1080/29.97PsF 1080/23.98PsF, 1080/25p, or 1080/25PsF. *3: To ensure safety, the unit must be secured using the mount bracket supplied. *4: Use of an STP (shielded twisted pair) cable is recommended. *5: Depending on the pan or tilt position, the camera may be reflected in the image. *6: To ensure more safety, AW-HE130W/K can be secured by using the direct ceiling mount bracket (WV-Q105A).
Installation Method	Stand-alone (Desktop) or suspended (Hanging)*3
OUTPUT	-
INPUT/OUTPUT	-
Pan-tilt Head Unit	-
Camera/pan-tilt head control	IP connecting cable • When connecting through a PoE+ hub: LAN cable*4 (category 5e or above, straight cable), max. 100 m (328 ft) • When a PoE+ hub is not used: LAN cable*4 (category 5 or above, crossover cable) max.100 m (328 ft) RP connecting Cable LAN cable*4 (category 5 or above, straight cable), max. 1000 m (3280 ft) RS-422A, AW series protocol
VIDEO OUTPUT	HDMI: HDMI connector • HDCP is not supported. • Viera Link is not supported. HD/SD-SDI OUT: SMPTE424/SMPTE292/SMPTE259 standards 75 Ω (BNC x 1) VIDEO OUT: NTSC/PAL 1.0 V [p-p]/75 Ω (BNC x 1)
Input/Output Connector	LAN: LAN connector for IP control (RJ-45), PoE+ RS-422: CONTROL IN RS-422A (RJ-45) MIC/LINE input: ø3.5 mm stereo mini jack Input impedance: High impedance • During MIC input Supported mic: Stereo mic (plug-in power, on/off switching via menu) • Supply voltage: 2.5 V ± 0.5 V Mic input sensitivity: Approx. -40 dBV ± 3 dBV (0 dB=1 V/Pa, 1 kHz) • During LINE input Input level: Approx. -10 dBV ±3 dBV
Pan-tilt Operation Speed	0.08°/s to 60°/s
Tilting Range*7	–30° to 210°*5

Accessories visible on product image are not included

Please be aware that John Barry has multiple warehouse locations in different states. 

If you wish to purchase in store, to avoid disappointment, please confirm the availability of the product at your local John Barry prior to visiting.

Alternatively, orders placed online by 2pm AEST are typically dispatched same day, if ordered online.

If your product is on backorder, please contact us for an ETA.

Shipping is done via Startrack Express or Australia Post eParcel service and tracking advice will be provided once shipped.

For more information, please visit our Shipping Policy.

John Barry Sales offers the same the warranty conditions as scheduled by the product manufacturer.

Should you have any questions regarding our equipment warranty conditions, please contact us

John Barry will happily exchange a product sold to you that does not match the description on our website, or if the product is not of an acceptable quality or condition for use.

John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.