- 1800 717 710 | Newsletter |
- FAQ |
- Contact
-
0 product
My Cart - Quick Order
- Home>
- Video/Photo>
- Cameras>
- PTZ>
- PTZ Cameras>
- PANASONIC HD Integrated Cam HDMI White
PANASONIC HD Integrated Cam HDMI White
The AW-HE40 pan/tilt/zoom camera incorporates newly-developed 1/2.3-type full HD MOS sensors and Digital Signal Processors (DSP) for high sensitivity, high resolution and superior video capture in a wide range of shooting conditions.
The pan range of ±175° and the tilt range of -30° to +90° cover a wide shooting area. Pan and tilt operate at a maximum speed of 90°/second and respond quickly
to remote control operation. They operate quietly at a sound level of NC35 or lower. Up to 100 preset positions and camera settings are stored in the camera, more than enough for the most demanding large venue installation. The camera weighs only 3.3 lbs. and consumes just over 14.4 watts at 12 VDC.
Video Outputs: Standard professional interfaces include HDMI, as well as IP/Network for single cable delivery of high-quality content up to 1080/60p. Audio Input: Audio input and embedding (on IP, HDMI) are also available via a switchable, stereo MIC/LINE input. Serial Control: RS-422 serial compatibility is available for serial-based control workflows (i.e. connection to AW-RP50/120 or previous controllers). RS-232 and RS-422 VISCA protocol is available when introducing a Panasonic camera into an existing control structure.
USB or microSD Card Recording: The mini-USB connector allows the AW-HE40 to be utilized as a USB camera utilizing standard USB Video/Audio class drivers. Many applications that connect to USB cameras, such as teleconferencing or software switching solutions, will be able to connect to the HE40 without external converters. Alternatively, microSD recording enables ISO MP4/H.264 recording internally in the HE40, transfer of content over the network via web browser or FTP.
Network Connected: The LAN port on the HE40 unleashes the possibilities
- Power of Ethernet+ (PoE+) for easier system installation and setup
- Control the camera via the network with an AW-RP50/120 hardware controller or Panasonic software solutions
- Access the built-in web interface to monitor and control all aspects of the camera
- Utilize a supported third party control system from broadcast control systems, switchers, lecture capture systems, AV Control system and more
- By default, the camera has a built-in H.264/MJPEG encoder for 7 channels of encoding up to 25Mbps. Pair with a supported hardware or software decoder
- Available NDI|HX upgrade (a technology of NewTek Inc.) for the ultimate single cable production workflow with Ultra-low latency video, audio, control, tally, and power over a single cable (new.tk/ndi_panasonic) or choose the AW-HN40H for out-of-the-box support for NDI|HX
Flexible Installation & Mounting
Blend-in: The camera is exceptionally easy to integrate and is available in two colors (-W: pearl white and -K: black matte) to suit a wide range of applications.Ceiling Mount: A twist-lock ceiling mount is included as a standard accessory.
Tripod Mount for Mobile Production: The HE40 is also equipped with a 1/4-20 tripod mounting screw receptacle and a safety lanyard for use with many mounting and grip systems.
Wall Mount: An optional heavy-duty wall mount is available in either black (FEC-40WMK) or white (FEC-40WMW).
- 1/2.3-Type MOS & 30x optical zoom
- PoE+ Support for single cable power, streaming and camera control
- High Dynamic Range (HDR) mode
- HDMI Video Output Format: 1080/50p, 1080/59,94p, 1080/50i, 1080/59.94i, 1080/25ü, 1080/29.97p, 1080/25psF, 1080/29.97psF, 720/50p, 720/59.94p
- IP connection allows control of up to 100 AW-HE40H/S units by using AW-RP50E & IP Image output function allows Image monitoring by IP connection with a PC
Dimensions (W x H x D) | 160 mm x 186 mm x 166 mm (6-5/16 inches x 7-41/128 inches x 6-17/32 inches) [excluding protrusions, direct ceiling mount bracket] |
---|---|
Power | DC 12 V IN, PoE+ (IEEE802.3at standard) |
Input/Output Connector | LAN:LAN connector for IP control (RJ-45) Equipped with straight/crossover cable auto detection function RS-232C:Mini DIN 8-pin (IN) Mini DIN 8-pin (OUT) RS-422:CONTROL IN RS422A (RJ-45) USB:Mini-B port SD card:microSD card slot |
Storage Temperature | –20 °C to 50 °C (–4 °F to 122 °F) |
VIDEO OUTPUT | HDMI: [AW-HE40HW/HK] HDMI connector * HDCP is not supported. * VIERA Link is not supported. HD SDI OUT: [AW-HE40SW/SK] Compliant with the SMPTE292M standards/75 Ω(BNC x 1) |
Imaging Sensors | 1/2.3-type MOS |
Finish | [AW-HE40HWPJ9], [AW-HE40SWPJ9], [AW-HE40HWEJ9], [AW-HE40SWEJ9] Pearl white [AW-HE40HKPJ9], [AW-HE40SKPJ9], [AW-HE40HKEJ9], [AW-HE40SKEJ9] Metallic black |
Allowable Humidity Ranges | 20 % to 90 % (no condensation) |
Mass | Approx. 1.5 kg (3.30 lb) |
Controller supported*1 | AW-RP50, AW-RP120, AK-HRP200 |
INPUT | - |
Mic/line input | Stereo mini-jack (ø3.5 mm) Input impedance: Approx. 2 kΩ (unbalanced) [Mic input] Supported microphones: Stereo mic (plug-in power, on/off switching via menu) Supplied voltage: 2.5 V ± 0.5 V Mic input level: –60 dBV ± 3 dBV [Line input] Input level: -10 dBV ± 3 dBV |
OUTPUT | - |
INPUT/OUTPUT | - |
FunctionS And Perfomance | - |
Camera Unit | - |
LENS | Motorized 30x zoom, F1.6 to F4.7 [f=4.3 mm (11/64 inches) to 129 mm(5-5/64 inches); 35 mm (1-3/8 inches) equivalent: 31.6 mm (1-31/128 inches)to 962.0 mm (37-7/8 inches)] |
Synchro scan | 59.94 Hz : 59.94 Hz to 660.09 Hz 50 Hz : 50.00 Hz to 570.12 Hz |
Horizontal Resolution | 1000 TV lines Typ (Center area) |
WHITE BALANCE | AWB A, AWB B, ATW, 3200K,5600K, VAR (2400K to 9900K) |
Output Format | HD 1080:59.94p/50p*4 1080:59.94i/50i 1080:29.97p/25p 1080:29.97PsF/25PsF 720:59.94p/50p |
Color separation optical system | On-chip color filter system |
Focus | Switching between auto and manual |
Focus Distance | Entire zooming range:1.2 m (3.94 ft) Wide end: 10 cm (0.33 ft) |
Gamma | Off, Normal (Low, Mid, High), Cinema |
Scene File | Full Auto, Manual1, Manual2, Manual3 |
Synchronization System | Internal synchronization |
Electronic Shutter Speed | During: 1/30 to 1/2000 [59.94 Hz] Full Auto: 1/25 to 1/2000 [50 Hz] During Auto: 1/60 to 1/2000 [59.94 Hz], 1/50 to 1/2000 [50 Hz] During: 1/100, 1/250, 1/500, 1/1000, 1/2000, Manual: 1/4000, 1/10000 [59.94 Hz], 1/120, 1/250, 1/500, 1/1000, 1/2000,1/4000, 1/10000 [50 Hz] |
Chroma Amount Variability | ±3 step |
MINIMUM ILLUMINATION | 59.94 Hz:0.7 lx (50 IRE, F1.6, 48 dB,1/60 without accumulation) 0.35 lx (50 IRE, F1.6, 48 dB,1/30 with accumulation[Frame Mix 6 dB]) 50 Hz:0.7 lx (50 IRE, F1.6, 48 dB,1/50 without accumulation) 0.35 lx (50 IRE, F1.6, 48 dB,1/25 with accumulation[Frame Mix 6 dB]) |
Gain selection*2 | Auto, 0 dB to 48 dB (3 dB step) |
Frame mix*3 | Auto, Off, 6 dB, 12 dB, 18 dB, 24 dB |
Frame rate | max 30 fps (System frequency 59.94 Hz) max 25 fps (System frequency 50 Hz) |
AUDIO OUTPUT | USB Audio Class Ver1.0 |
Resolution | 1920 x 1080, 1280 x 720, 640 x 360 |
Pan/Tilt Operation Speed | Maximum speed during preset: 300°/s Maximum speed during manual: 90°/s |
Panning range | ±175° |
Quietness | During preset: NC40 or less During manual: NC35 or less |
Tilting Range | –30° to 90°*6 |
Video Compression Format | Motion JPEG |
Audio Compression Format | Linear PCM, 48 kHz, 16-bit, 2 channels |
Installation Method | Stand-alone (Desktop) or suspended (Hanging)*5 |
[USB connection] * This may vary depending on the operating environment. | - |
Video output (USB connection) | USB Video Class Ver1.0 |
Supported models | Devices standardly equipped with a USB 2.0 compatible port |
Pan-tilt Head Unit | - |
Camera/pan-tilt head control | - |
IP connecting cable | When connecting through a hub: LAN cable*7 (category 5 or above),max. 100 m (328 ft) When using a PoE+ hub: LAN cable*7 (category 5e or above),max. 100 m (328 ft) When a hub is not used: LAN cable*7 (category 5 or above),max. 100 m (328 ft) |
AW protocol connecting cable | LAN cable*7 (category 5 or above,straight cable), max. 1000 m (3280 ft) |
Standard protocol connecting cable | Mini DIN 8-pin cable, male |
SD card type | micro SDHC (4 GB to 32 GB), micro SDXC (64 GB to 128 GB), Speed class 10 or higher |
Accessories | Mount bracket for installation surface (Hanging*8 / Desktop): 1 Drop-prevention wire (already attached to the unit): 1 Bracket mounting screws (bind-head) M4 x 10 mm: 4 Main unit mounting screw (with flat washer, spring washer) M3 x 6 mm: 1 Power cable (1.5 m [4.92 ft]): 1 AC adaptor: 1 CD-ROM: 1 |
Recording Format | 1920 x 1080/59.94p, 1920 x 1080/50p, 1920 x 1080/29.97p, 1920 x 1080/25p, 1280 x 720/59.94p, 1280 x 720/50p, 1280 x 720/29.97p, 1280 x 720/25p |
Supported protocol | IPv4: TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP, DHCP, DNS, NTP, IGMP, UPnP, ICMP, ARP, RTSP RTSPoverHTTP, SSL(TLS), MultiCast/UniCast IPv6: TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP, DHCPv6, DNS, NTP, ICMPv6(MLD), RTSPoverTCP, RTSPoverHTTP, SSL(TLS), MultiCast/UniCast |
System frequency | 59.94 Hz/50 Hz |
Video compression format (SD) | MPEG-4 AVC/H.264 High Profile |
Audio compression format (SD) | AAC-LC (48 kHz, 16 bit, 2 ch, 128 kbps) |
SD card recording | MPEG-4 AVC file standard compliant (.MP4) |
Network | - |
Resolution (Network) | JPEG: VGA (640 x 360), QVGA (320 x 180) max.30 fps 1920 x 1080, 1280 x 720, 640 x 360, 320 x 180 max.30 fps H.264: 1920 x 1080, 1280 x 720, 640 x 360, 320 x 180 max.60 fps |
iOS, Android Support | JPEG image display |
Note | * 1: It may be necessary to upgrade the version of the controller so that the controller will support the unit. * 2: During Auto, 6 dB to 48 dB (6 dB step) are available for AGC Max Gain setting. * 3: During Auto, 0 dB, 6 dB, 12 dB and 18 dB are available for Auto F.Mix Max Gain setting. * 4: AW-HE40HW/HK only * 5: To ensure safety, the unit must be secured using the mount bracket supplied. * 6: Depending on the pan or tilt position, the camera may be reflected in the image. * 7: Use of an STP (shielded twisted pair) cable is recommended. * 8: To ensure more safety, AW-HE40 series can be secured by using the direct ceiling mount bracket (WV-Q105A). |
If you wish to purchase in store, to avoid disappointment, please confirm the availability of the product at your local John Barry prior to visiting.
Alternatively, orders placed online by 2pm AEST are typically dispatched same day, if ordered online.
If your product is on backorder, please contact us for an ETA.
Shipping is done via Startrack Express or Australia Post eParcel service and tracking advice will be provided once shipped.
For more information, please visit our Shipping Policy.
Should you have any questions regarding our equipment warranty conditions, please contact us
John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.