Shop by Category
- Spare parts
- Web Promotions
- Just In
- Featured Products
- Web Specials
LECTROSONICS HMA C1 PLUG ON W / BAND TX (614.400 - 691.175 MHz)
LECTROSONICS HMA C1 PLUG ON W/BAND TX (614.400 - 691.175 MHz)The HMa from Lectrosonics is a UHF plug-on transmitter that accepts mic or line-level signals via a standard XLR connector. It has selectable 5, 15, & 48V phantom power and can be used when paired with a Lectrosonics receiver and handheld microphone - sold separately - in applications for ENG (Electronic News Gathering), EFP (Electronic Field Productions), interviews for broadcast TV, and more. The input amplifier of the HMa transmitter uses an ultra-low noise op-amp for quiet operation and is gain controlled with a wide range dual envelope limiter. A 24-bit A to D converter digitizes the audio, and filters the supersonic noise above 21 kHz. The resulting signal is encoded with a proprietary algorithm to produce an analog data signal for RF transmission. Featuring a wide tuning range of 76 MHz, with tuning steps in increments of 100 kHz or 25 kHz for up to 3072 frequencies, the HMa transmitter also covers three standard 25.6 MHz Lectrosonics frequency blocks. Each block provides 256 different pilot tone frequencies. Legacy analog wireless microphone and IFB receivers are designed to work in DSP compatibility mode, as well as some receivers from other manufacturers. Finally, the transmitter is powered by two AA batteries, with status indicated by a multi-color LED. A USB port is also provided for firmware updates, and an IR (infrared) port is included to simplify setup with IR enabled receivers.
- For Broadcast, EFP and ENG Applications
- Accepts Mic or Line-Level Signals
- Up to 3072 Selectable Frequencies
- Low Frequency Roll-Off
- Transmits on Block C1
- Powered by Two AA Batteries
- USB port for Firmware Updates
- IR (Infrared) Port for Fast Setup
- Solid Machined Aluminum Housing
- Built-In Antenna
If your product is on backorder, please contact us for an ETA.
Shipping is done via Startrack Express or Australia Post eParcel service and tracking advice will be provided once shipped. For more information, please visit our Shipping Policy.
John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.