LECTROSONICS HMA B1 PLUG ON W / BAND TX (537.600-614.375 MHz)

LECTROSONICS HMA B1 PLUG ON W / BAND TX (537.600-614.375 MHz)

Product code : LEC.HMA/B1


Bookmark and Share


$ 2,261.00
    • Each
    • Availability: Order before 2pm - Dispatch same day

Tell a Friend

The HMa from Lectrosonics is a UHF plug-on transmitter that accepts mic or line-level signals via a standard XLR connector. It has selectable 5, 15, & 48V phantom power and can be used when paired with a Lectrosonics receiver and handheld microphone - sold separately - in applications for ENG (Electronic News Gathering), EFP (Electronic Field Productions), interviews for broadcast TV, and more.The input amplifier of the HMa transmitter uses an ultra-low noise op-amp for quiet operation and is gain controlled with a wide range dual envelope limiter. A 24-bit A to D converter digitizes the audio, and filters the supersonic noise above 21 kHz.

The resulting signal is encoded with a proprietary algorithm to produce an analog data signal for RF transmission.Featuring a wide tuning range of 76 MHz, with tuning steps in increments of 100 kHz or 25 kHz for up to 3072 frequencies, the HMa transmitter also covers three standard 25.6 MHz Lectrosonics frequency blocks. Each block provides 256 different pilot tone frequencies. Legacy analog wireless microphone and IFB receivers are designed to work in DSP compatibility mode, as well as some receivers from other manufacturers.Finally, the transmitter is powered by two AA batteries, with status indicated by a multi-color LED. A USB port is also provided for firmware updates, and an IR (infrared) port is included to simplify setup with IR enabled receivers.


HMA DATA SHEET

HMA QUICK START GUIDE

HMA MANUAL

  • Accepts microphone or line level signals
  • Selectable 5, 15, 48 volt phantom power
  • 76 MHz tuning range in 100 kHz or 25 kHz steps (bands A1, B1)
  • 941 band offers 695 frequencies over 19 MHz tuning range with 25 kHz steps
  • Selectable 50/100 mW output power
  • Adjustable low frequency roll-off
  • Powered by two AA batteries
  • USB port for firmware updates
  • IR (infrared) port for fast setup
  • Solid machined aluminum housing
  • For Broadcast, EFP and ENG Applications
  • Accepts Mic or Line-Level Signals
  • Up to 3072 Selectable Frequencies
  • Low Frequency Roll-Off
  • Transmits on Block B1
  • Powered by Two AA Batteries
  • USB port for Firmware Updates
  • IR (Infrared) Port for Fast Setup
  • Solid Machined Aluminum Housing
  • Built-In Antenna
Accessories visible on product image are not included
Please be aware that John Barry has multiple warehouse locations in different states. 

If you wish to purchase in store, to avoid disappointment, please confirm the availability of the product at your local John Barry prior to visiting.

Alternatively, orders placed online by 2pm EST are typically dispatched same day. For more information, please visit our Shipping Policy.
John Barry Sales offers the same the warranty conditions as scheduled by the product manufacturer.

Should you have any questions regarding our equipment warranty conditions, please contact us

John Barry will happily exchange a product sold to you that does not match the description on our website, or if the product is not of an acceptable quality or condition for use.

John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.