Freefly Ember S5K - Ember S5K (Passive Universal Mount, 4TB)
Press and move to zoom
Mouse over image to zoom

Freefly Ember S5K - Ember S5K (Passive Universal Mount, 4TB)

Product code : FRE.950-00114



$ 31,100.30
    • Each
    • Availability: Out of Stock Call for a delivery estimate

Tell a Friend

Ember. It’s a cinematic beast in a very small package. With an all new super 35 global shutter sensor with expanded dynamic range, it shoots 4K 800FPS, 5K 600FPS, and a whole bunch of other speeds and frames.


Ember can record up to a 46min clip and record time is only limited by the 4TB SSD.  The chassis is completely redesigned and features an iOS App based workflow that is simple, fast and efficient.  Our mission was to go from capture to share as quickly as possible with the Ember.


Ember is a 100mm (4 inch) cube and weighs 820g, optimized for flight.  It features a locking E mount and some really nice tablet, monitor, and accessory mounting solutions.  It will run for 2+ hours on our SL4 battery and can be powered off just about any battery using our included D tap cable. 


Freefly designed Ember to be the most efficient high speed camera ever. It’s small, light, and insanely fun to use. Ember is unique in that it can record continuous high speed footage with no ram based clip limit since it records directly to a 4TB internal SSD. 


Shooting high speed is now just like shooting anything else, push record to start and stop, and Ember captures everything to solid state memory - as simple... as that.


The Ember app for iOS means you can go from capture to sharing in seconds. 


Check out these (untreated) sample clips shot with Ember. 


We're reserving the first shipments of Ember for existing Wave customers. So if you already have a Wave, let us know so we can flag your order accordingly! 

Qty 1 - Ember S5K camera body (4TB internal SSD)
Qty 1 - Locking E-Mount (non-electronic, pre-installed)
Qty 1 - Rear accessory mount stand-offs (pair)
Qty 1 - USB C-C 3.0 Cable
Qty 1 - D-Tap-Ember Power Cable 
Qty 8 - M3 x 10mm SHCS fasteners for accessory mounts
5K max resolution at 600fps
4K 800fps
Gpixel sensor 
Fast iOS based app workflow
Apple ProRes Codec
Global Shutter
Wireless Control
USB 3.2 Type C 

IMAGE SENSOR
Format
S35

Native Aspect Ratio
5:4

Pixel Size
4.5µm x 4.5µm

Native Resolution
21MP 5120 x 4096

Active Area
23.04mm x 18.43mm

Shutter Type
Global Electronic

Native ISO
300

LENS MOUNT
Standard Lens Mount
E-mount Compatible

Removable
Yes

Positive Locking
Yes

Electronic
No

RECORDING
MediaInternal NVMe SSD
Media Size4TB
FormatApple ProRes
Native Bit Depth10-bit
Resolutions / Frame RatesSee Maximum Frame Rates

 

POWER
DC Input VoltageOperation12-26V
Power ConsumptionStandby20W
Recording (Max Rate)40W

 

INTERFACE
DC Input4-pin Molex Microfit
w/ CAN

 

HDMI OutputHDMI A (Full Size)
1080p30

 

GPIO6-Pin JST GH
Optically Isolated
Start/Stop/Sync
UART (3.3V or 5.0V)

 

USBType C (Reversible)
USB 3.2 Gen1x1
SuperSpeed 5Gb/s

 

WirelessWiFi 5 (802.11ac)

 

EthernetRJ45 Connector
1000BASE-T (GigE)

 

OTHER FEATURES
Firmware Updatevia USB-C
Upgradeable StorageYes
On-Board IMUYes

 

LCDNo
Audio RecordingNo
AutofocusNo

 

PHYSICAL
Dimensionsw/ E-mount100mm Width x 104mm Height x 86mm Depth
Weightw/ E-mount820g
Mounting Points1/4-202: 1x Top, 1x Bottom
M324: 4x per Side

 

ENVIRONMENTAL
Operating Temperature0ºC to 40ºC
Ingress ProtectionIP52

Accessories visible on product image are not included

Compatability

E-Mount Lenses (not Sony AF lenses, as they require a powered lens mount to operate)
E-Mount Lens adapters (EF, PL, etc, but not RF as the flange depth is mismatched)

Please be aware that John Barry has multiple warehouse locations in different states. 

If you wish to purchase in store, to avoid disappointment, please confirm the availability of the product at your local John Barry prior to visiting.

Alternatively, orders placed online by 2pm AEST are typically dispatched same day, if ordered online.

If your product is on backorder, please contact us for an ETA.

Shipping is done via Startrack Express or Australia Post eParcel service and tracking advice will be provided once shipped.

For more information, please visit our Shipping Policy.
John Barry Sales offers the same the warranty conditions as scheduled by the product manufacturer.

Should you have any questions regarding our equipment warranty conditions, please contact us

John Barry will happily exchange a product sold to you that does not match the description on our website, or if the product is not of an acceptable quality or condition for use.

John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.