AMIMON CONNEX Mini  Rx & Tx
Press and move to zoom
Mouse over image to zoom

AMIMON CONNEX Mini Rx & Tx

Product code : AMN.1811PB01



$ 2,679.00
$ 1,661.00
38% discount
    • Each
    • Availability: In Stock Order before 2pm - Dispatch same day

Tell a Friend

Amimon Connex Mini Rx & Tx


Amimon's CONNEX Mini
 features the same 1080p60, zero-latency performance as the standard CONNEX, but in a scaled form factor and with a line-of-sight range of 1600'. Both the air and ground units have been reduced in size. The Air Unit weighs just 2.1 ounces, making ideal for smaller UAS, such as those carrying action cameras like a GoPro or compact mirrorless cameras like the Panasonic GH4. 

The Air Unit incorporates a micro-HDMI input and includes an adapter cable suitable for a GoPro with HDMI output (cables for other cameras available separately). On the Ground Unit, there is a standard HDMI output for connecting FPV goggles, a field monitor, or other monitoring or recording device. For applications where several users require a their own video feed, up to four ground receivers (available separately) can be linked with one Air Unit.
Plug & Fly
CONNEX Mini is designed to setup and get you working out of the box – no complicated binding procedures here
Full HD Resolution
Unlike analog systems, which limit you to SD resolution, the digital CONNEX Mini system provides support for up to 1080p60
Virtually No Latency
Featuring less than 1 ms of latency, the CONNEX Mini does not buffer or hold your video, so you can see and control what's happening live. Use CONNEX Mini video to help you fly, aim the camera, or operate the gimbal
5.8G ISM Band Operation
CONNEX Mini uses the 5.1 to 5.8 GHz frequency range to avoid interfering with aircraft control systems, which are usually 2.4 GHz. Automatic Frequency Selection (AFS) will choose the best available channel to be used and move seamlessly to an alternative channel on-the-fly if needed
Gimbal Control
CONNEX Mini is able to relay the control signal for an S.Bus- or PPM-controllable gimbal mounted on the UAV. A dedicated transmitter for the gimbal can then be connected to the Ground Unit via its 2.5mm transmitter port. PPM and Futaba (S.Bus) trainer port adapter cables are provided
OSD (On-Screen Display) Overlay
CONNEX Mini On-Screen-Display (OSD) is a great way to see your flight status. The OSD shows both information about your wireless link status, and telemetry from your UAV flight controller. It works with MAVLink- and CAN-Bus-based telemetry modules (available separately)
Multicast Function
The CONNEX Mini can transmit to up to four ground units simultaneously – great for applications where multiple users require a dedicated video feed (addition ground receivers available separately)
Encrypted Transmission
CONNEX Mini employs AES128 for the video encryption and RSA1024 for key exchange to help ensure no one unauthorized is able to intercept your video feed
Management Software for Mobile and Desktop
Access advanced setting and update firmware. The CONNEX management software is available for Windows, OS X, and Android

Accessories shown in pictures are not included.

If promotional pricing has been applied be advised it only applies to current stock & until stock lasts.

Feature

CONNEX Mini

Transmission distance (Outdoor)

Up to 1,600 ft/500m (LoS)

Transmission delay

Zero (Less than 1 msec.)

Radio frequency

5.1-5.8 GHz

Channel

40 MHz

Channel selection

Automatic frequency selection (AFS)

Video formats

1080p/60, 1080p/50, 1080i/60, 1080i/50, 1080p/30, 1080p/24, 720p/60, 720p/50, 525i/60, 625i/50

Multicast mode

Up to 4 receivers with no delay or quality degradation. (Requiring extra ground unit/s)

OSD support

CANBUS & MAVLink Telemetry based

Gimbal control

SBUS & PPM

Encryption

AES-128 & RSA 1024 for key exchange

Operating temperature

0-45° Celsius

Regulation

CE, FCC, MIC

Mobile App [new]

Windows, Android





















<

 



Feature

Air Unit

Ground Unit

Video interface

Micro HDMI

HDMI (Type A)

Antenna connectors

SMA (x2) R/P

SMA (x3) R/P

Power connector

4-pins

DC jack

Power input

6-28V (2S-6S)

6-28V (2S-6S)

Power input

6-28V (2S-6S)

6-28V (2S-6S)

Power Consumption

12v, 390-410mA

12V, 330-390mA

Dimensions (mm)

65.5x44.7x14.9

100.2x71.2x17.15

Weight

60 grams

140 grams

Accessories visible on product image are not included
Please be aware that John Barry has multiple warehouse locations in different states. 

If you wish to purchase in store, to avoid disappointment, please confirm the availability of the product at your local John Barry prior to visiting.

Alternatively, orders placed online by 2pm AEST are typically dispatched same day, if ordered online.

If your product is on backorder, please contact us for an ETA.

Shipping is done via Startrack Express or Australia Post eParcel service and tracking advice will be provided once shipped.

For more information, please visit our Shipping Policy.
John Barry Sales offers the same the warranty conditions as scheduled by the product manufacturer.

Should you have any questions regarding our equipment warranty conditions, please contact us

John Barry will happily exchange a product sold to you that does not match the description on our website, or if the product is not of an acceptable quality or condition for use.

John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.