- 1800 717 710 | Newsletter |
- FAQ |
- Contact
-
0 product
My Cart - Quick Order
- Home>
- Brands>
- Tenacious Tapes>
- Consumables>
- Adhesive Tapes>
- Double Sided Tape>
- Tenacious K330 Double Sided Cloth Differential Release Tape 48mm x 25m
Tenacious K330 Double Sided Cloth Differential Release Tape 48mm x 25m
Tenacious K330 Double Sided Exhibition Grade Cloth Carpet Tape - High tack one side / Low tack the other
Tenacious K330 is a synthetic fabric cloth carrier with a rubber based differential adhesive - open side 3.3N/cm floor & 5.7N/cm expo tile/carpet, closed side
Specially designed for the temporary holding of exhibition floor coverings.
The tough cloth, whilst difficult to tear should remove from the floor cleanly and without breaking. It has been designed to stick to the floors better than the floor covering to facilitate clean and easy removal.
Surface Prep
The surface on which the tape is to be used must be clean, dry and free from grease and dust.
Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels.
The recommended application temperature is between 15ºC and 25ºC.
Storage
Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Approved for use at various exhibition venues in Australia - please confirm use with the venues specific operational guidelines
Designed for the temporary holding of most floor coverings
Temporary repair, handcraft etc
Retail carpet/vinyl fixing tape
Differential adhesion - open side 3.3. floor / 5.7 expo tile/carpet
Clean remove - low residue. K330 has a high tensile strength cloth which allows it to lift from the venue surface without breaking
Approved for use at various exhibition venues in Australia - please confirm use with the venues specific operational guidelines
Liner Thickness: 0.125mm
Tensile Strength: 60 N/cm
Adhesion to Steel: Open Side: 3.3 N/cm
Closed Side: 5.7 N/cm
Service Temperature: -10°C to 70°C
Storage Temperature: 15°C to 25°C
Shelf Life: 12 Months
If you wish to purchase in store, to avoid disappointment, please confirm the availability of the product at your local John Barry prior to visiting.
Alternatively, orders placed online by 2pm AEST are typically dispatched same day, if ordered online.
If your product is on backorder, please contact us for an ETA.
Shipping is done via Startrack Express or Australia Post eParcel service and tracking advice will be provided once shipped.
For more information, please visit our Shipping Policy.
Should you have any questions regarding our equipment warranty conditions, please contact us
John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.