- 1800 717 710 | Newsletter |
- FAQ |
- Contact
-
0 product
My Cart - Quick Order
Stylus 352 Premium Cloth Tape - Green 48mm x 25m
Product code : STY.2912
Stylus 352 Premium Cloth Tape
Premium cloth tape suitable for a wide range of everyday applications & available in a variety of colours & widths from 12mm – 1.2m.Applications:
– Bundling
– Book binding
– General repair & maintenance applications
– Sealing & joining PE drop sheets & films
– Colour coding
– Adheres to most surfaces both indoor & outdoor short term
– Marking, sealing & cord protection in exhibition & conference centres
Tear straight & can be torn by hand
Coated with natural rubber adhesive
Humidity resistant
Water repellent PE backing
Individually bagged
Capable of withstanding cold temperatures
pH neutral adhesive
Available in 9 colours: beige, black, blue, brown, green, red, silver,
white & yellow
Sizes Available72mm x 25M, 96mm x 25M, 12mm x 25M, 24mm x 25M, 36mm x 25M, 48mm x 25M
Colours AvailableBeige, Black, Black, White, Red, Blue, Yellow, Green, Silver, Beige, Brown, Blue, Brown, Green, Red, Silver, White, Yellow
ApplicationCLOTH TAPE PREMIUM
AdhesiveNATURAL RUBBER
BrandStylus
IndustriesConstruction & Industrial, Entertainment & Exhibition
Backing MaterialPE
Tensile Strength (N/cm)66.6
Adhesion to Steel (N/25mm)10.8
Total Thickness310um
Temperature Range (°C)0 to 40
STEP 1 - SURFACE EVALUATION:
There are numerous types of adhesive tapes, some suited to a variety of uses and others for more specialised individual applications.
A thorough evaluation is recommended when bonding to any surface. Porous surfaces such as wood, concrete & brick should be smooth &
sealed with an appropriate sealer prior to application. All adhesive tapes should only be applied to clean & dry surfaces. There are various
methods of preparation depending on the surface and/or application. For technical advice we recommend you speak with our local sales office.
Surfaces must be free of:
• Any Contaminants
• Moisture & Chemical Residue
• Dust, Fibres, Concrete Powders, Sand, Soil & Dirt Particles
• O.E.M. Cleaners, Grease, Wax, Detergent & Release agents on plastic profiles/extrusions etc
• Flaking Paint & Corrosion
STEP 2 - CLEANING INSTRUCTIONS:
The surface being applied to should be prepared with an appropriate cleaning solution, preferably IPA (Isopropanol) using a clean lint-free
wiping cloth or disposable wipe (never re-cycled rags). Renew cleaning cloths regularly. (Applications involving paper, board, fabric etc do
not requireIPA cleaning) This should be performed immediately prior to application of adhesive tape. When using any cleaning solutions it is
recommended to test a small area to ensure there is no reaction/discolouration with the surface. It is important to note that all painted/sealed
surfaces should be completely dry/cured. (Refer to manufactures recommendations).
STEP 3 - INSTALLATION PROCESS:
Once the surface has been adequately prepared tape application can commence. Care should be taken to avoid finger contact with adhesive.
The portion of tape held by your fingers should overlap the area being applied to & trimmed, as finger contact with any adhesive tape will
significantly reduce its performance. Both single & double sided tapes require sufficient rub down pressure to ensure 100% surface contact.
Where double sided tapes are being used pressure must be re-applied after both surfaces have been brought together. Surface temperature
should be above 10ºC at time of application. (Use some heat if necessary - Hair Dryer, Fan Heater etc.).
NB. Storage – Ensure all tapes are stored in clean/dry condition & returned to the protective bagbetween use.
SPECIAL NOTE: Adhesive Bond Strength will improve with time varying from a few hours to 2-3 days depending on the adhesive tape
product used & climactic conditions.
If you wish to purchase in store, to avoid disappointment, please confirm the availability of the product at your local John Barry prior to visiting.
Alternatively, orders placed online by 2pm AEST are typically dispatched same day, if ordered online.
If your product is on backorder, please contact us for an ETA.
Shipping is done via Startrack Express or Australia Post eParcel service and tracking advice will be provided once shipped.
For more information, please visit our Shipping Policy.
Should you have any questions regarding our equipment warranty conditions, please contact us
John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.