- 1800 717 710 | Newsletter |
- FAQ |
- Contact
-
0 product
My Cart - Quick Order
Stylus 352 Mark Up Tape - Red 12mm x 25m
Stylus 352 Mark Up Tape - Red 12mm x 25m
Stylus 352 Mark Up Tape - Red (12mm x 25m): The Gentle Giant of Marking Needs
Need a reliable, removable tape for delicate tasks? Look no further than Stylus 352 Mark Up Tape in black. This premium cloth tape is ideal for a variety of applications where a strong yet gentle hold is required.
Here's what makes Stylus 352 Mark Up Tape the perfect choice:
Red color: Provides excellent contrast for clear marking on various surfaces.
12mm width: Perfect for thin lines, labeling, and intricate marking needs.
25m length: Offers long-lasting use for extended projects.
Premium cloth material: Conforms to uneven surfaces and removes cleanly without leaving residue.
Less aggressive adhesive: Ideal for delicate applications like film, photography, and stage marking where strong adhesives can damage surfaces.
Stylus 352 Mark Up Tape is perfect for:
Event planners and stage crews: Mark cables, lighting rigs, and set pieces without damaging delicate surfaces.
Photographers and filmmakers: Secure cables, light modifiers, and props during shoots.
Architects and designers: Label plans, drawings, and prototypes with ease.
General purpose use: Everyday marking tasks around the house, office, or classroom.
Order your Stylus 352 Mark Up Tape in black today and experience the difference!
Can be torn by hand
Tears straight
Humidity resistant
Water repellent PE backing
Individually bagged
Capable of withstanding cold temperatures
pH neutral adhesive
Available in 9 colours: beige, black, blue, brown, green, red, silver,
white & yellow
Conformance RoHS, REACH
Thickness - um 310
Outdoor rating Short term
Tensile strength - N/cm 66.6
Adhesive type Natural Rubber
Elongation - % 8 • Adhesion to steel - N/25mm 10.8
Operating Temperature - °C 0 to 40
Backing material PE coated cloth
Recommended Storage Conditions
Product must be kept in a dry atmosphere away from direct sunlight.
Recommended Cleaning & Installation Procedures
STEP 1 - SURFACE EVALUATION:
There are numerous types of adhesive tapes, some suited to a variety of uses and others for more specialised individual applications.
A thorough evaluation is recommended when bonding to any surface. Porous surfaces such as wood, concrete & brick should be smooth &
sealed with an appropriate sealer prior to application. All adhesive tapes should only be applied to clean & dry surfaces. There are various
methods of preparation depending on the surface and/or application. For technical advice we recommend you speak with our local sales office.
Surfaces must be free of:
• Any Contaminants
• Moisture & Chemical Residue
• Dust, Fibres, Concrete Powders, Sand, Soil & Dirt Particles
• O.E.M. Cleaners, Grease, Wax, Detergent & Release agents on plastic profiles/extrusions etc
• Flaking Paint & Corrosion
STEP 2 - CLEANING INSTRUCTIONS:
The surface being applied to should be prepared with an appropriate cleaning solution, preferably IPA (Isopropanol) using a clean lint-free
wiping cloth or disposable wipe (never re-cycled rags). Renew cleaning cloths regularly. (Applications involving paper, board, fabric etc do
not requireIPA cleaning) This should be performed immediately prior to application of adhesive tape. When using any cleaning solutions it is
recommended to test a small area to ensure there is no reaction/discolouration with the surface. It is important to note that all painted/sealed
surfaces should be completely dry/cured. (Refer to manufactures recommendations).
STEP 3 - INSTALLATION PROCESS:
Once the surface has been adequately prepared tape application can commence. Care should be taken to avoid finger contact with adhesive.
The portion of tape held by your fingers should overlap the area being applied to & trimmed, as finger contact with any adhesive tape will
significantly reduce its performance. Both single & double sided tapes require sufficient rub down pressure to ensure 100% surface contact.
Where double sided tapes are being used pressure must be re-applied after both surfaces have been brought together. Surface temperature
should be above 10ºC at time of application. (Use some heat if necessary - Hair Dryer, Fan Heater etc.).
NB. Storage – Ensure all tapes are stored in clean/dry condition & returned to the protective bagbetween use.
SPECIAL NOTE: Adhesive Bond Strength will improve with time varying from a few hours to 2-3 days depending on the adhesive tape
product used & climactic conditions.
The optimal storage conditions for this product is between 18ºC - 22ºC with a relative humidity of 40% - 50%.
For optimal performance, product should be used within 6 months from date of dispatch from Stylus Tapes & no later than 12 months from date
of manufacture.
If you wish to purchase in store, to avoid disappointment, please confirm the availability of the product at your local John Barry prior to visiting.
Alternatively, orders placed online by 2pm AEST are typically dispatched same day, if ordered online.
If your product is on backorder, please contact us for an ETA.
Shipping is done via Startrack Express or Australia Post eParcel service and tracking advice will be provided once shipped.
For more information, please visit our Shipping Policy.
Should you have any questions regarding our equipment warranty conditions, please contact us
John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.