- 1800 717 710 | Newsletter |
- FAQ |
- Contact
-
0 product
My Cart - Quick Order
- Home>
- Brands>
- Sanken Microphones>
- Audio>
- Microphones>
- Lapel>
- Lapel Mics>
- Sanken COS11D Lapel Mic Lectrosonics SSM 3 Pin Lemo Black 1.8m Cable
Sanken COS11D Lapel Mic Lectrosonics SSM 3 Pin Lemo Black 1.8m Cable
The black Sanken COS-11D Omni Lavalier Microphone with Normal Sensitivity and LEMO 3-Pin Connector for Lectrosonics SSM Transmitters is a subminiature lapel microphone designed to deliver clear, full-bodied sound and reliable performance, making it a popular choice among industry professionals in broadcast, TV, theatre, film, videography, and more.
Engineered to meet the standards of modern digital wireless microphone systems, the COS-11D is RF shielded to eliminate interference issues and ensure a pristine audio signal. The microphone capsule features a rectangular design that sits vertically, increasing the surface area and allowing this tiny mic to offer a rich, full sound that outperforms many larger models.
The mic's 50 Hz to 20 kHz frequency response rolls off extreme low end and provides accurate, transparent audio reproduction with a small presence boost in the 6 kHz area for crisp, intelligible speech. With a forgiving omnidirectional polar pattern that picks up sound in a 360° pattern, levels stay consistent, even when the subject turns away from the mic.
A water-resistant mesh screen protects against humidity, perspiration, makeup, bad weather, and other potential on-location issues, while the durable cable is also moisture resistant and built to stay soft and pliable, even after extended use. This version of the COS-11D terminates in a 3-pin LEMO connector and is wired for use with Lectrosonics transmitters. Accessories are sold separately and are not included with this configuration of the microphone.
LEMO 3-Pin Connector
Compatible Wireless Transmitters
Lectrosonics bodypack transmitters and recorders equipped with a 3-pin LEMO connector, including the SSM.
Third-party wireless transmitters and portable audio recorders equipped to supply 3 to 10 VDC through a 3-pin LEMO connector wired for Lectrosonics compatibility.
Broadcast-Quality Sound and Dependable Performance
Subminiature Mic with a Big Sound
The camera-ready COS-11D features a subminiature capsule that enables the microphone to be inconspicuous and easily disguised in clothing or costumes. The unique vertical diaphragm design offers a clear and natural sound optimized for the human voice.
Normal Headroom for Standard Speech
This version of the mic features a normal sensitivity setting for standard speech at levels up to 123 dB SPL.
Omnidirectional Polar Pattern
The forgiving omnidirectional polar pattern picks up sound from all around the mic and provides a consistent frequency response, even for off-axis sound. This helps supply clear, intelligible speech and vocals, even when the talent isn't speaking directly toward the microphone.
Tough, Water-Resistant Construction for Indoor/Outdoor Locations
The water-resistant front mesh screen provides reliable protection from perspiration and moisture, making the mic a solid performer in all kinds of weather. The rugged cable is also built to resist moisture and handling noise and stay pliable, even after repeated uses.
HC-11 Horizontal Microphone Clip
WS-11 Metal Windscreen
RM-11 Rubber Microphone Mount
Plastic Case
Limited 2-Year Manufacturer Warranty
Omnidirectional for Consistent Levels
For Lectrosonics SSM Transmitters with LEMO
Normal Sensitivity Level
Rugged 1.8m Cable Stays Pliable
RF Shielded for Digital Wireless
Water Resistant
Small Size is Easy to Conceal
Requires 3 to 10 VDC
Includes Windscreen, Mount & Clip
Sound FieldMono
Capsule1 x Electret Condenser
Polar PatternOmnidirectional
WindscreenMetal Mesh (Included)
Performance
Frequency Range50 Hz to 20 kHz
Maximum SPL123 dB SPL
Impedance700 Ohms
Sensitivity8.9 mV/Pa
Dynamic Range95 dB
Signal-to-Noise Ratio66 dB
Equivalent Noise Level28 dB A-Weighted
THD< 1%
Connectivity
Outputs1 x LEMO 3-Pin Male Balanced
Headphone ConnectorNone
Cable Length 1.8 m
Cable Diameter 2.1 mm
Power
Operating Voltage3 to 10 V
Operating Current Consumption0.5 mA
Physical
ColorBeige
MountingAlligator Clip, Rubber Body Mount (with Included Hardware)
Dimensions ø: 4 x L: 16.1 mm
Weight 24 g (Microphone)
If you wish to purchase in store, to avoid disappointment, please confirm the availability of the product at your local John Barry prior to visiting.
Alternatively, orders placed online by 2pm AEST are typically dispatched same day, if ordered online.
If your product is on backorder, please contact us for an ETA.
Shipping is done via Startrack Express or Australia Post eParcel service and tracking advice will be provided once shipped.
For more information, please visit our Shipping Policy.
Should you have any questions regarding our equipment warranty conditions, please contact us
John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.