IDX IPL-150 143Wh PowerLink Li-ion V-Mount Battery with 2x D-Taps & 1x USB
Press and move to zoom
Mouse over image to zoom

IDX IPL-150 143Wh PowerLink Li-ion V-Mount Battery with 2x D-Taps & 1x USB

IDX

Product code : IDX.IPL-150



$ 836.00
    • Each
    • Availability: In Stock Order before 2pm - Dispatch same day

Tell a Friend

IDX IPL-150 is the stackable battery solution for digital cinema cameras where infinite runtimes are required.

With 143Wh capacity, the IPL-150 meets the passenger aircraft carry-on limit and can still provide mobile power to cine-style cameras such as the ARRI ALEXA Mini and RED Monstro all day long if needed.

The IPL-150 also includes two on-battery D-Taps and USB outputs to power accessories such as monitors, lights, wireless receivers, tablets, phones, etc.


View Operations Manual

  • 143Wh capacity
  • PowerLink capability (stackable up to four IPL-98/IPL-150 or IDX brand V-mount battery) (Except IMCRO-98/IMCRO-150)
  • Meets passenger aircraft travel regulations
  • Capable of handling high loads up to 11.3A loads (14A when linked)‡
  • (1) 80W D-Tap Advanced Output (unregulated) – D-Tap Output with the added ability to charge battery using low-cost D-Tap Charger (VL-DT1)
  • (1) 80W D-Tap Output (unregulated)
  • (1) DC 5.0V /2.3A USB output (auto shut off after 30 minutes of inactivity)
  • 5 Power Indicator LEDs (displaying 10% increments)
  • Battery circuit protection ensures the IPL-150 is fully protected against common causes of battery misuse, guarding against over charge, over discharge, over current and exposure to high temperatures
  • The highest grade Lithium Ion cells are used to ensure the IPL-150 is one of the most reliable batteries on the market
  • 11V auto cut-off prevents over-discharging (while load is applied)
  • Fully compatible with all ENDURA V-Mount Battery chargers and accessories. VL-2000S charger is needed for stack charging.
  • Environmentally friendly and recyclable
Battery Capacity 143Wh (14.4V/ 9.9Ah)
Max.Output Voltage 16.8V DC
Nominal Voltage 14.4V DC
Maximum Discharge Current 11.3A (14A when linked)‡
D-Tap 80W each
USB DC 5.0V / 2.3A
End Voltage 11V
Battery Protection Over charge, Over discharge, Over current, Thermal protection
Ambient Temperature To charge: 0°C ~ 40°C (10°C ~ 30°C recommended)
To discharge: -20°C ~ 45°C (10°C ~ 40°C recommended)
To store: -20°C ~ 50°C (one month)
Dimensions 89(W) x 119(H) x 85(D)mm
Weight 970 grams approx.
 may vary depending on the operating temperature
Accessories visible on product image are not included

How to properly store batteries:
* For short term storage (day-to-day, week-week) = Store fully charged

* For long term storage (month-to-month, three months+) = Maintain a 20-40% charge in a cool and dry room for every 3
 months of non-use. Check batteries periodically and charge when necessary. All lithium-Ion cells have a self-discharge rate,
 so it is important to properly maintain and check batteries during long-term storage. Otherwise the battery cells will begin to
 discharge, which will lead to the battery becoming over-discharged and the cell balance collapsing (dead).

*Periods of complete inactivity can damage Li-ion cells

Note: Keep stored batteries away from heat. (Examples include environments such as automobile trunks, heaters, ovens, and stoves)

How to properly discharge batteries:
* When using with video or lighting equipment, power consumption of the equipment must be equal to or less than the max
 discharge capacity of the battery (The max discharge loads are listed below).
* Note that Li-Ion Batteries can be used in ambient temperatures of -20°C~50°C, but runtimes will be shorter in extreme high
 and low temperatures.
* Stop discharge at 12V to reduce cell damage. 

How temperature affects battery charge:
* Low ambient temperatures may cause slow activation of electrolytes, which results in a decreased rate of charge and
discharge.
* High ambient temperatures may accelerate cell deterioration.

Do Not Completely discharge Li-ion batteries prior to storage
Periods of complete inactivity can damage Li-ion cells
Read product manual for full storage instructions

Please be aware that John Barry has multiple warehouse locations in different states. 

If you wish to purchase in store, to avoid disappointment, please confirm the availability of the product at your local John Barry prior to visiting.

Alternatively, orders placed online by 2pm AEST are typically dispatched same day, if ordered online.

If your product is on backorder, please contact us for an ETA.

Shipping is done via Startrack Express or Australia Post eParcel service and tracking advice will be provided once shipped.

For more information, please visit our Shipping Policy.
John Barry Sales offers the same the warranty conditions as scheduled by the product manufacturer.

Should you have any questions regarding our equipment warranty conditions, please contact us

John Barry will happily exchange a product sold to you that does not match the description on our website, or if the product is not of an acceptable quality or condition for use.

John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.