- 1800 717 710 | Newsletter |
- FAQ |
- Contact
-
0 product
My Cart - Quick Order
- Home>
- Brands>
- IDX>
- Video/Photo>
- Power Solutions>
- Camera Batteries>
- Pro Series>
- IDX SL-F50 48Wh 7.2V / 6.6Ah Lithium ion Battery for NP-F type
IDX SL-F50 48Wh 7.2V / 6.6Ah Lithium ion Battery for NP-F type
IDX SL-F50 48Wh 7.2V/6.6Ah Lithium ion Battery for NP-F typelt-in
The IDX System Technology SL-F50 Lithium-Ion Battery is a 48Wh lithium-ion battery that can power cameras and accessories compatible with Sony L-series (NP-F) batteries. Additionally, the 7.2V X-Tap and 5V USB outputs can be used to power accessories simultaneously.
*To use the X-Tap output, an X-Tap cable must be purchased separately.
Charge capacity can be displayed via 4 built-in LEDs indicating the remaining charge available, if the charge falls below 6v or less the LEDs will flash 3 times.
Compatible with equipment and accessories using the Sony L-series batteries
Sony NP-F series camcorders and cameras (e.g., HXR-NX5, HXR-NX1, PXW-Z280, etc.)
Other NP-F compatible devices
USB (Type-A) power output for powering USB devices, smartphones, and tablets
7.2V X-Tap power connector for powering camera accessories with separately available C-XTap2 cable
4-LED power indicator
Protected from over-charge, over-discharge, and over-currents at high loads
The SL-F series are compatible with most Sony and 3rd-party chargers. (Not compatible: Sony AC-VQ1051D)
- 6600mAh / 48Wh capacity
- Compatible with all equipment and accessories using the Sony L-series battery.
- USB (Type-A) power output for powering USB devices, smart phones and tablets
- 7.2V X-Tap power connector for powering camera accessories (C-XTap2 Cable accessory will be necessary for use)
- 4 Power Indicator LEDs
- Protected from over-charge, over-discharge, and over-currents at high loads
- Environmentally friendly and can be recycled
- Compatible with most Sony and 3rd-party chargers. (Not compatible: Sony AC-VQ1051D)
Battery Capacity | 6600mAh, 48Wh |
Max. Output Voltage | DC 8.4V |
Nominal Output Voltage | DC 7.2V |
Max. Discharge Rates | Main Connector: 30W/6.0A X-Tap: 20W/4A USB: 2.3A |
Battery Protection | Over charge, Over discharge, Over current |
Dimensions | 38.1(W) x 61.2(H) x 70.6(D) mm |
Weight | 250 grams approx. |
How to properly store batteries:
* For short term storage (day-to-day, week-week) = Store fully charged
* For long term storage (month-to-month, three months+) = Maintain a 20-40% charge in a cool and dry room for every 3
months of non-use. Check batteries periodically and charge when necessary. All lithium-Ion cells have a self-discharge rate,
so it is important to properly maintain and check batteries during long-term storage. Otherwise the battery cells will begin to
discharge, which will lead to the battery becoming over-discharged and the cell balance collapsing (dead).
*Periods of complete inactivity can damage Li-ion cells
Note: Keep stored batteries away from heat. (Examples include environments such as automobile trunks, heaters, ovens, and stoves)
How to properly discharge batteries:
* When using with video or lighting equipment, power consumption of the equipment must be equal to or less than the max
discharge capacity of the battery (The max discharge loads are listed below).
* Note that Li-Ion Batteries can be used in ambient temperatures of -20°C~50°C, but runtimes will be shorter in extreme high
and low temperatures.
* Stop discharge at 12V to reduce cell damage.
How temperature affects battery charge:
* Low ambient temperatures may cause slow activation of electrolytes, which results in a decreased rate of charge and
discharge.
* High ambient temperatures may accelerate cell deterioration.
Do Not Completely discharge Li-ion batteries prior to storage
Periods of complete inactivity can damage Li-ion cells
Read product manual for full storage instructions
If you wish to purchase in store, to avoid disappointment, please confirm the availability of the product at your local John Barry prior to visiting.
Alternatively, orders placed online by 2pm AEST are typically dispatched same day, if ordered online.
If your product is on backorder, please contact us for an ETA.
Shipping is done via Startrack Express or Australia Post eParcel service and tracking advice will be provided once shipped.
For more information, please visit our Shipping Policy.
Should you have any questions regarding our equipment warranty conditions, please contact us
John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.