- 1800 717 710 | Newsletter |
- FAQ |
- Contact
-
0 product
My Cart - Quick Order
- Home>
- Audio>
- IFB>
- IFB receivers>
- Lectrosonics IFBR1B Bodypack IFB Receiver 537.600-614.375 MHz
Lectrosonics IFBR1B Bodypack IFB Receiver 537.600-614.375 MHz
Wireless IFB (interruptible fold back) systems are used for talent cueing and crew communications in broadcast and motion picture production. In other cases, the IFB system is used by directors and other management to monitor program audio during a production. The IFBR1B receiver provides simplicity and flexibility in a package that is intuitive for untrained users to operate. Despite its tiny size, the new IFBR1B receiver offers excellent performance on par with all of Lectrosonics’ IFB products.
The Lectrosonics IFBR1B is housed in a rugged aluminum package. A wire beltclip is included and provides a secure mounting on a wide variety of belts, pockets and fabrics. An optional “clamp style” spring-loaded belt clip is also available: the IFBR1BBCSL. The Lectrosonics IFBR1B is powered for over 8 hours by a removeable, rechargeable LB-50 lithium ion battery. NOTE: The IFBR1B does not ship standard with the single battery charger. To order this unit with a charger, order as a kit: IFBR1B-WITH-CHARGER. The IFBR1B can be dock charged without removing the battery with the optional CHSIFBR1B.
- 1 – 3.7 Volt Lithium Ion Battery LB-50 (Part # 40106-1)
- 1 – Wire belt clip (Part # 27528)
- 1 – Velcro Strain Relief (Part #VSR1)
- 1 – Manual
- Stores up to 10 frequency presets in memory
- LCD interface for programming and operation
- High sensitivity for extended operating range indoors or outdoors
- USB port for firmware updates
- Compact, rugged machined aluminum housing
- Attached battery door
- 8+ hours battery life with removable LB-50 Li-ion
- Dock chargeable with optional CHSIFBR1B
Frequency Selection Steps: 25 kHz or 100 kHz, selectable
Sensitivity: 1 uV (20 dB SINAD)
Signal/Noise ratio: 95 dB A-weighted
Squelch quieting: 90 dB
AM rejection: 50 dB, 10 uV to 100 mV
Modulation acceptance: ±20 kHz
Spurious rejection: Greater than 70 dB
Operating temperature range: -20 to 45 degrees C
Third order intercept: 0 dBm
Frequency response: 100 Hz to 10 kHz, (+/-1 dB)
Audio output: 1V RMS into 50 ohms minimum
Antenna: Headphone cable
Min. headphone impedance: 16.0 Ohms
Programmable memory: 10 frequencies can be stored as presets
Controls:Top Panel: Single knob controls Audio Output Level and Power OnSide Panel: Membrane switches with LCD interface for FrequencySelection and Preset function
Indicators: Multi-color LED indicator for power on and batterystatus
Battery: LB-50 Li-ion 3.6 V 1000 mAH
Battery Life: 8 hours per charge with LB-50 Li-ion battery
Current consumption: 120 mA
Weight: 3.4 oz (with battery and wire belt clip)
Size: 2.8 x 2.4 x 0.8 in.71.1 x 70.0 x 20.3 mm