Lectrosonics L Series LT Bodypack Wireless Transmitter 537.600-614.375MHZ

Product code : LEC.LT/B1



$ 2,700.01
    • Each
    • Availability: Out of Stock Call for a delivery estimate

Tell a Friend

Lectrosonics Digital Hybrid Wireless® Belt-Pack Transmitter 537.600-614.375 Mhz - Blocks 21, 22 & 23

The LT transmitter offers a full set of professional features in a compact, rugged package. The unit is compatible with all Digital Hybrid Wireless® receivers and even some from other manufacturers, making it comfortable in a wide variety of applications from video production to theater, stage and house of worship.

The LT can be configured to operate as a “one touch” device with a single power on/off switch on the top panel, or with full access to all operational parameters using the side panel membrane switches and LCD interface. The top panel switch can also be configured to provide a mute or talkback function.

 

Microphones, line level audio sources and instruments can be used with the transmitter

 

Two types of high levels signals can be used with the transmitter:
• Line Used with line level outputs from recorders, mixers and other audio devices.
• Instr. (instrument) A special type of high impedance input with an active preamp for an optimal match with instrument pickups.

 

IR (infrared) Sync
The opening on the keypad is an IR port for quick setup using a receiver with this function available. IR Sync will transfer the settings for frequency, step size and compatibility mode from the receiver to the transmitter.

 

LectroRM
By New Endian LLC
LectroRM is a mobile application for iOS and Android operating systems. Its purpose is to remotely control Lectrosonics Transmitters, including:
• SM Series
• WM
• L Series

LT DATA SHEET

LT MANUAL

  • 2 - AA Batteries
  • 1 - AMMXX (Specify Block)
  • 1 - 26895 Wire Belt Clip (Installed on Transmitter)
  • Covers two frequency blocks
  • Digital Hybrid Wireless® for compandor-free audio
  • Selectable 50 or 100mW output power
  • Compatibility modes for use with analog receivers
  • 25 or 100 kHz tuning steps 
  • Integrated multi-function switch for mute or talkback modes
  • Wide range input gain control in 1 dB steps
  • IR port for setup with IR enabled receivers
  • USB port for firmware updates
  • Menu selectable mic or instrument input
  • Optional battery eliminator
  • Detachable antenna
Accessories visible on product image are not included

About Digital Hybrid Wireless®

All wireless links suffer from channel noise to some degree, and all wireless microphone systems seek to minimize the impact of that noise on the desired signal. Conventional analog systems use compandors for enhanced dynamic range, at the cost of subtle artifacts (known as “pumping” and “breathing”). Wholly digital systems defeat the noise by sending the audio information in digital form, at the cost of some combination of power, bandwidth, operating range and resistance to interference.

The Lectrosonics Digital Hybrid Wireless system overcomes channel noise in a dramatically new way, digitally encoding the audio in the transmitter and decoding it in the receiver, yet still sending the encoded information via an analog FM wireless link. This proprietary algorithm is not a digital implementation of an analog compandor but a technique which can be accomplished only in the digital domain.
Since the RF link between transmitter and receiver is FM, channel noise will increase gradually with increased operating range and weak signal conditions, however, the Digital Hybrid Wireles system handles this situation elegantly with rarely audible audio artifacts as the receiver approaches its squelch threshold.

In contrast, a purely digital system tends to drop the audio suddenly during brief dropouts and weak signal conditions. The Digital Hybrid Wireless system simply encodes the signal to use a noisy channel as efficiently and robustly as possible, yielding audio performance that rivals that of purely digital systems, without the power, noise and bandwidth problems inherent in digital transmission. Because it uses an analog FM link, Digital Hybrid Wireless enjoys all the benefits of conventional FM wireless systems, such as excellent range,

Please be aware that John Barry has multiple warehouse locations in different states. 

If you wish to purchase in store, to avoid disappointment, please confirm the availability of the product at your local John Barry prior to visiting.

Alternatively, orders placed online by 2pm AEST are typically dispatched same day, if ordered online.

If your product is on backorder, please contact us for an ETA.

Shipping is done via Startrack Express or Australia Post eParcel service and tracking advice will be provided once shipped.

For more information, please visit our Shipping Policy.
John Barry Sales offers the same the warranty conditions as scheduled by the product manufacturer.

Should you have any questions regarding our equipment warranty conditions, please contact us

John Barry will happily exchange a product sold to you that does not match the description on our website, or if the product is not of an acceptable quality or condition for use.

John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.