IDX Kit 2x SL-F50 and 1x LC-2A
Press and move to zoom
Mouse over image to zoom

IDX Kit 2x SL-F50 and 1x LC-2A


Product code : IDX.2A2F50

Bookmark and Share

$ 360.00
    • Availability: In Stock Order before 2pm - Dispatch same day

Tell a Friend

The IDX 2A2F50 LC-2A 2-Bay Simultaneous Charger Kit with 2 x IDX SL-F50 batteries and 1 x IDX LC-2A charger, allows you to simioultaniously charge 2 batteries even of different types, as the LC-2A is supplied with 5 pairs of interchangable battery plates, for select 7.4 volt Canon, Panasonic & Sony DV batteries.

The compact, portable charger features LED indicators that communicate charging status. At the same time, it's designed with thermal monitoring and quick-charge safeguard, which causes it to automatically stop charging when the battery is full so as not to damage the battery. Also, if the charger is inactive for one hour, it will power down entirely.

Batteries Supported Using Included Battery Plates


BP-955, BP-975, LP-E6




NP-F550, NP-F750, NP-F960, NP-F570, NP-F770, NP-F970, FM50

IDX (Panasonic)


IDX (Sony)

SL-F50, SL-F70



  • 10 Interchangeable plates (2 for each interface)
  • Simultaneously charges two batteries at the same time (can be mixed types refer to compatibility chart)
  • Universal AC input for worldwide use
  • Charger status LED indicators
  • Light-weight and portable
  • Charging will automatically stop when the battery is fully charged


  • 6600mAh / 48Wh capacity
  • Compatible with all equipment and accessories using the Sony L-series battery.
  • USB (Type-A) power output for powering USB devices, smart phones and tablets
  • 7.2V X-Tap power connector for powering camera accessories (C-XTap2 Cable accessory will be necessary for use)
  • 4 Power Indicator LEDs
  • Protected from over-charge, over-discharge, and over-currents at high loads
  • Environmentally friendly and can be recycled

Input Voltage: AC 100-240V 50/60Hz
Power Consumption: 36W max
Charge Current: 1.9A
Charger Input Voltage: 12-19V DC
Dimensions: 4.92(W) x 1.57(H) x 4.37(D) inches
Weight: 0.38 lbs approx.


Capacity: 6600mAh, 48Wh
Max Output Voltage: 8.4V DC
Nominal Voltage: 7.2V DC
Max Discharge Current: Main Connector: 30W/6.0A
X-Tap: 20W/4A
USB: 2.3A
Battery Protection: Over charge, Over discharge, Over current
Dimensions: 1.5(W) x 2.41(H) x 2.78(D) inches
Weight: 0.55 lbs approx.

How to properly store batteries:
* For short term storage (day-to-day, week-week) = Store fully charged

* For long term storage (month-to-month, three months+) = Maintain a 20-40% charge in a cool and dry room for every 3
 months of non-use. Check batteries periodically and charge when necessary. All lithium-Ion cells have a self-discharge rate,
 so it is important to properly maintain and check batteries during long-term storage. Otherwise the battery cells will begin to
 discharge, which will lead to the battery becoming over-discharged and the cell balance collapsing (dead).

*Periods of complete inactivity can damage Li-ion cells

Note: Keep stored batteries away from heat. (Examples include environments such as automobile trunks, heaters, ovens, and stoves)

How to properly discharge batteries:
* When using with video or lighting equipment, power consumption of the equipment must be equal to or less than the max
 discharge capacity of the battery (The max discharge loads are listed below).
* Note that Li-Ion Batteries can be used in ambient temperatures of -20°C~50°C, but runtimes will be shorter in extreme high
 and low temperatures.
* Stop discharge at 12V to reduce cell damage. 

How temperature affects battery charge:
* Low ambient temperatures may cause slow activation of electrolytes, which results in a decreased rate of charge and
* High ambient temperatures may accelerate cell deterioration.

Do Not Completely discharge Li-ion batteries prior to storage
Periods of complete inactivity can damage Li-ion cells
Read product manual for full storage instructions

Please be aware that John Barry has multiple warehouse locations in different states. 

If you wish to purchase in store, to avoid disappointment, please confirm the availability of the product at your local John Barry prior to visiting.

Alternatively, orders placed online by 2pm AEST are typically dispatched same day, if ordered online.

If your product is on backorder, please contact us for an ETA.

Shipping is done via Startrack Express or Australia Post eParcel service and tracking advice will be provided once shipped.

For more information, please visit our Shipping Policy.
John Barry Sales offers the same the warranty conditions as scheduled by the product manufacturer.

Should you have any questions regarding our equipment warranty conditions, please contact us

John Barry will happily exchange a product sold to you that does not match the description on our website, or if the product is not of an acceptable quality or condition for use.

John Barry reserves the right under Australian Consumer Law to refuse a request for an exchange or refund on all final sale items, if you have misused/mishandled the product, or if you have simply changed your mind. Please visit our Refunds & Returns policy page for further information.

You may also be interested in

IDX LC-2A 7.4V / 7.2V 2ch Simultaneous Charger
  • $ 180.00
  • Qty